Conductivity Electrodes
Hach Company SC4500 Ctrl mA Out 1 anlg Cond
SC4500 Controller-mA Output-1 analog UPW Conductivity Sensor-24 VDC-without power cordIncludes Controller-Non-Claros Embedded Prognosys-without power cord includes mounting hardware
Cole-Parmer Conductivity Probe, 2-cell, K = 10.0, Epoxy Body/Pt Bands, 2.5-ft Cable
Keep your multiparameter meters up and running with replacement conductivity probes.
Cole-Parmer Conductivity Probe, 4-cell, K = 1.0, Glass/Pt, 2.5 ft Cable
Keep your multiparameter meters up and running with replacement conductivity probes.
Andwin Scientific M-CELL 6/PK
The M-Cell or Six Pack is composed of six test kits. Each test kit has vacuum packed expendables that are used to conduct one test. This product also contains a container of distilled water to perform water separation tests.
Grainger Toroidal Conductivity Kit Noryl
The Grainger 16Z066 is a Westward 3/8-inch drive deep impact socket set. This 12-piece socket set includes sizes ranging from 10mm to 19mm, providing a versatile range of metric sockets for impact wrench use. The sockets are made from chrome vanadium steel for durability and have a black phosphate finish to resist corrosion. The deep design allows access to fasteners in tight spaces. Overall this Westward impact socket set offers a quality selection of 3/8-inch drive metric impact sockets for automotive repair and industrial applications.
Sigma Aldrich Fine Chemicals Biosciences Human CRISPRi Membrane Pro
CRISPRi is a potent tool for modulating gene expression. This technology uses dCas9 to act as a synthetic transcription factors by recruiting endogenous transcription repressor complexes to gene promoters and enhancers resulting in down regulated gene transcription. CRISPRi achieves LOF phenotypes without the limitations of RNAi and CRISPR KO although CRISPRi relies on delivery by lentivirus this technology offers new possibilities for genome engineering. CRISPRi can be used individually to target areas of the genome that are inaccessible by other gene perturbation technologies (e.g. non-coding regions) or in conjunction to uncover gene-regulatory networks underlying discrete phenotypes. Finally pooled CRISPRi screening can be paired with single-cell RNA-sequencing methods to enable high-dimensional characterization of CRISPR gene perturbation. Human CRISPRi Membrane Proteins Kit contains 2 sub-pools of top 5 gRNAs per gene as well as a separate sub-pool of 5 supplemental gRNAs pe
Hach Company Intellical™ CDC401 Laboratory 4-Poles Graphite Conductivity Cell, 3 m Cable
Intellical™ CDC401 is a digital, graphite, 4-pole conductivity cell with a temperature sensor. The standard version is available with a 3 or 1 m cable and is intended for laboratory use. The CDC401 is ideal for measuring electrical conductivity, salinity, resistivity, or total dissolved solids (TDS) in wastewater, drinking water, or general water quality applications.
TA Instruments Stainless Steel, Composite HB, 20 mm, Upper Plate with Composite Heat Break, for Use with Lower Peltier Plate, Smart Swap 2 Geometry, HR x0 Instruments Only
Waters TA Instruments HR X0, Stainless Steel, Composite HB, 20 mm is an upper plate with composite heat break for use with the lower Peltier plate. It has Smart Swap 2 geometry and is for use with HR X0 instruments only.
Hach Company Radiometer Analytical CDC866T Conductivity Cell with Temperature Sensor (4-pole Pt sensor, k = 1.0 cm-1, epoxy body)
The Radiometer CDC866T Conductivity Cell is a 4-pole conductivity cell with platinized, platinum sensor (k = 1.0 cm-1), robust epoxy body and integrated temperature sensor. The CDC866T sensor's platinized, 4-pole platinum ring design ensures results in saline (high conductivity) or general aqueous and non-aqueous media over several decades of conductivity with a single cell, using just one calibration. The epoxy body of the probe can be easily removed for rinsing, which makes the cell ideal for measurements in harsh conditions. The CDC866T has a fixed cable with MAB6 plug for use with Radiometer Analytical CDM210/230/92 conductivity meters. Please reference article no. E61M020 for the CDC836T (3-pole), compatible for use with Hach sensION+ benchtop conductivity meters.
Cole-Parmer WTW 301972 TetraCon 4-electrode conductivity probe, 10-m cable, waterproof DIN connector
WTW conductivity probes to suit your conductivity measurement needs.
Sigma Aldrich Fine Chemicals Biosciences Thermal Conductivity Fib
SRM 1450e cert SRM 1450e SDSThis Standard Reference Material (SRM) is intended primarily for use in the measurement of the thermal conductivity or thermal resistance of insulation materials. SRM 1450e is a high-density fibrous glass board certified for bulk density and thermal conductivity. The SRM can be used in conjunction with ASTM C177 or ASTM C518. A unit of SRM 1450e consists of a square panel of fibrous glass and phenolic binder molded into a semi-rigid board. The nominal dimensions of a unit are 610 mm x 610 mm x 25 mm.
Hach Company Radiometer Analytical CDC241 Conductivity Cell (2-pole Pt sensor, k = 1.0 cm-1, glass body, screw cap)
The Radiometer CDC241 is a 2-pole conductivity cell with non-platinized, platinum sensor (k = 1.0 cm-1) and glass body. The CDC241 sensor's 2 platinum plate design is ideal for continuous measurement or titration in viscous media. The CDC241 has a screw cap connection and requires the CL136 cable (part no. A94L136) for compatibility with Radiometer Analytical CDM210/230/92 conductivity meters or the CL143 cable (part no. A94L143) for compatibilty with Hach sensION+ benchtop conductivity meters.
Hach Company SC4500 Ctrl mA Out 2 anlg Cond
SC4500 Controller-mA Output-2 analog UPW Conductivity Sensors-100-240 VAC-without power cordIncludes Controller-Non-Claros Embedded Prognosys-without power cord includes mounting hardware
Hach Company Anlg Cond Sens Inpt Mod SC200
Analog Conductivity Sensor Input Module for SC200 Universal ControllerThe Analog Conductivity module for the SC200 is a user installed module that allows for connection of analog conductivity sensors to the controller This module works with both contacting and inductive analog conductivity sensors See manual for additional connection information
Cole-Parmer Oakton Platinum Cell Conductivity Probe, Glass, K=1.0; 2.5 ft Cable
If your conductivity measurements are off, you might need a new cell, sensor, or calibration kit. Update, upgrade, or replace to get the best out of your Oakton conductivity, resistivity, or TDS meter.